Liquid & leak alarms

Know about a leak the moment it starts

Lark Alert puts LoRaWAN leak sensors in the places water shows up first in a food business — walk-in cooler drains, ice machines, dish areas — and pushes an instant alert to the Lark Alert iPhone app the moment one of them gets wet.

  • LoRaWAN leak sensors placed where water starts
  • Instant push alert to the Lark Alert iPhone app
  • The incident stays open until a person closes it

Illustration of the Lark Alert iPhone app.

Why leak alarms matter

Water is one of the most common and most expensive things that goes wrong in a building, and most of it starts small. The figures below are industry and insurance data about that risk.

These figures are industry context from insurers and industry groups. They describe water risk generally — they are not Lark Alert results, and nothing here is a claim about what Lark Alert will detect or avoid at your sites.

Kitchens first

Food businesses are where Lark Alert started, and a kitchen has more wet spots than anything else on the site. These are the ones that turn into a flooded back of house, usually overnight or over a weekend.

Walk-in cooler and freezer drains

A drain line that clogs or freezes backs up and runs across the floor, often on the night nobody is in the building.

Ice machines

Supply lines, drain lines, and the bin underneath all leak, and the water pools under equipment where nobody is looking.

Dish areas and dishwashers

Hoses, gaskets, and drains let go in the wettest room you have, which is exactly where a real leak is easiest to miss.

Prep sinks

Supply lines and traps under prep sinks drip into cabinets and subfloor long before anything shows on the surface.

Water heaters

A tank that starts weeping gives you very little warning before it puts its whole contents on the floor.

Floor drains

A floor drain that backs up turns a small overflow into standing water across the back of house.

Other places on the same site

The same sensors cover the rest of the building, so one alert list holds everything on the property that can get wet.

Under sinks

Bar sinks, hand sinks, and restroom sinks hide their leaks inside a cabinet until the cabinet floor gives out.

Mechanical rooms

Pumps, valves, and water heaters sit in rooms people enter once a month, which is a long time for water to run.

Laundry

Washer supply hoses and drain standpipes are a classic source of water on a floor nobody is standing on.

HVAC condensate pans

A condensate pan that overflows drips into the ceiling below it and shows up as a stain days later.

How Lark Alert alerts you

Sensor sees water, your team's phones light up, and the incident stays open until a person closes it.

  1. Water reaches the sensor

    A LoRaWAN leak sensor — for example, the Dragino LWL02 — sits where water would show up first. When water bridges the probe, the sensor reports it.

  2. Your team gets a push alert

    An instant push alert goes to the Lark Alert iPhone app, so your team gets alerted on their phones instead of finding the water in the morning.

  3. The incident stays open until someone closes it

    A water-detected incident never closes itself. It stays open until a person acknowledges it and closes it, so nothing quietly disappears.

  4. A quiet sensor gets flagged

    Sensors are battery powered and check in about once a day. If one goes silent, Lark Alert raises an offline-sensor alert rather than treating the silence as dry.

Questions about leak alarms

  • What hardware does Lark Alert use for leak detection?

    LoRaWAN leak sensors — for example, the Dragino LWL02. They are battery powered, check in about once a day, and report when water reaches the probe.

  • Where does the alert go?

    To the Lark Alert iPhone app, as a push alert. Your team gets alerted on their phones.

  • What happens after someone sees the alert?

    The incident stays open until a person acknowledges it and closes it. It never auto-closes, so an open alert always belongs to someone.

  • What if a sensor stops reporting?

    Lark Alert flags it with an offline-sensor alert. A sensor that has gone quiet is its own problem, and silence is never read as good news.

  • Does Lark Alert shut the water off?

    No. Lark Alert is sensors and alerts. It tells you where water showed up and keeps the incident open so a person can go handle it.

  • Can leak sensors sit alongside temperature monitoring?

    Yes. Leak sensors live under the same organizations and sites as the coolers and freezers Lark Alert already watches, so one team sees both.

See leak alarms on your kitchen

Tell us which sites and which wet spots you want covered and we'll walk you through what Lark Alert looks like on them.

Request a demo

Prefer email or phone? sales@larkalert.com or (406) 208-5466.